Installation
Retaining plate A
^ Drill two 1/8" (3 mm) holes, one at S + 4" (100 mm) and one at S + 16 3/4" (425 mm) on the center line for the retaining plate (see "Appliance dimensions").
^ Lightly secure retaining plate A into | ^ Drill 4 more 1/8" (3 mm) holes through |
position using 5 x 40 mm screws | |
through the two holes and use the | the now fitted retaining plate. |
| |
notches to align with the center line. | ^ Screw two 5 x 40 mm screws into the |
| upper two holes. |
| Retaining plate B |
| ^ Hold retaining plate B to the wall and |
| push up until it is directly below the |
| ceiling. Use the notches and the |
| center line to align it horizontally. |
| Mark the 2 drill holes on the wall. |
| ^ Drill two 1/8" (3 mm) holes into the |
| wall. |
| ^ Secure the retaining plate with two |
| 5 x 40 mm screws. |
33
