Miele DA 219-3, DA217-3 installation instructions Condensate trap, Air extraction

Models: DA 219-3 DA217-3

1 44
Download 44 pages 46.67 Kb
Page 43
Image 43
Condensate trap

Air extraction

If the exhaust is ducted into an inactive flue, the air must be expelled parallel to the flow direction of the flue.

Never connect an exhaust hood to an active chimney, dryer vent, vent flue, or room venting ductwork. Seek professional advice before connecting an exhaust hood vent to an existing, inactive chimney or vent flue.

Condensate trap

Important:

If the ductwork runs through rooms, ceilings, garages, etc. where temperature variations exist, it may need to be insulated to reduce condensation. In some cases, a condensate trap may also be required to collect and evaporate any condensate which may occur.

When installing a condensate trap, ensure that it is positioned vertically and if possible directly above the exhaust outlet.

43

Page 43
Image 43
Miele DA 219-3, DA217-3 installation instructions Condensate trap, Air extraction