Cleaning and care
Before any cleaning or maintenance work is carried out, disconnect the cooker hood from the mains supply. Ensure that:
–it is switched off at the wall socket and the plug is withdrawn, or
–the fuse is withdrawn from the fused spur connection unit, or
–the mains fuse is disconnected ,or
–the
A microfibre
Housing
General notes
Warning: The surfaces and controls are susceptible to scratches and abrasions. Please observe the following cleaning instructions.
^All external surfaces and controls can be cleaned using warm water with a little
^Wipe the surfaces dry using a soft cloth.
Do not use too much water when cleaning the controls. Water could penetrate into the electronics and cause damage.
Do not use:
–cleaning agents containing soda, acids, chlorides or solvents,
–abrasive cleaning agents, e.g. powder cleaners or cream cleaners and abrasive sponges, as well as pot scourers or sponges which have been used previously with abrasive cleaning agents. These will damage the surface material.
Important for appliances with stainless steel housing
(This infomation does not apply to the controls).
Stainless steel surfaces can be cleaned with a proprietary
To help prevent
Controls
The controls may suffer discolouration or damage if soiling is left on them for too long. Remove soiling straight away.
Observe the General notes on cleaning earlier in this section.
Do not use stainless steel cleaning agents on the controls.
15