Installation
Set up for extraction mode
^Remove the protective strip around the edge of the grease filter.
Replace the grease filter.
^To do this, pull the deflector plate out.
^Turn the grease filter so that the red plastic guides are at the front and facing upwards.
^Replace the grease filter in the front of the deflector plate, press it upwards and push it in together with the deflector plate. It will slide onto the fixing pins at the back. Finally, push the grease filter back a little more.
^If the
^The appliance is set up for use with C 150 mm ducting. If C 125 mm ducting is required, the reducing collar supplied must be fitted to the exhaust socket (see section "Connection for air extraction").
^Secure the ventilation ducting over the exhaust socket on the cooker hood using a hose clip.
^See "Connection for air extraction" for further instructions on fitting the ducting.
29