Installation
^When fitting a DA 3180 or a DA 3190 into a 60 cm housing unit, unscrew the brackets on the deflector plate whilst it is pulled out.
^Lift the appliance up into the housing from below, and engage in the brackets.
Note for dismantling the cooker hood: Undoing the screws on the left and right inside the housing releases the brackets, allowing the appliance to be removed from the unit.
^Push the cooker hood back against the spacer strip.
^Pull out the deflector plate.
^Secure the appliance to the brackets using 2 screws on each side.
^Remove the protective film between the deflector plate and the casing.
27