Operation
Automatically switching back the intensive power level
The intensive level can be programmed to automatically switch back to level 3 after 10 minutes.
To set this option, the fan and the overhead lighting must be turned off and the fume deflector pushed in.
Press and hold the
Then press the following buttons one after another :
–overhead lighting ,
–the
–overhead lighting again,
If the indicators 1 and IS flash, the automatic switch back is not activated.
To activate the automatic switch back, press the "+" button.
The power level indicators 1 and IS light continuously.
To deactivate, press the
Press the On/Off button to confirm.
If the procedure is not stored within 4 minutes, the hood will automatically default to the "old" data.
Automatic Safety Shut-Off
If the ventilation system is left on, the fan will turn automatically off 10 hours after the last button was activated. The lighting however will remain on.
Press the On/Off button to turn the fan back on again.
11
