
Installation
2 runners
(1 x right, 1x left) to support the hood in the cabinet.
1 spacer strip
to conceal the gap between the rear of the appliance and the wall.
Installation kit for recirculation mode; contains air outlet grille, hose and hose clips
(optional accessory)
Installation kit DML 400 to install a custom panel
contains retractable brackets and screws (optional accessory)
CAUTION
To avoid risk of hand or other injury, avoid contact with sharp edges during the assembly and installation process.
8 screws 4 x 15 mm
to anchor the ventilation hood in the cabinet.
8 screws M4 x 12 mm
to anchor the ventilation hood at the runners.
4 screws could be used (alternatively to the plastic rivet) to fix the spacer bar.
2 screws 4 x 15 mm
to anchor the ventilation hood at rear wall.
4 plastic rivets
to connect the space bar with the appliance rear wall.
25