Installation information
Do not place any items that prodice heat on top of the appliance (such as a toaster or microwave). This will increase the amount of energy the appliance consumes.
This fridge/freezer should not be placed in a
Location
The appliance should not be installed directly next to a heat source (such as a stove/oven or a radiator), or in direct sunlight. The higher the adjacent temperature, the more energy the appliance requires to keep cool. Choose a dry,
Climate range
The appliance is designed for use within a certain temperature range (room temperature), and should not be used outside this range. The climate range is stated on the model plate inside the appliance.
Climate range | Room temperature | |
|
| |
SN | +10 °C to +32 °C | |
| (50 | F to 90 F) |
N | +16 °C to +32 °C | |
| (61 | F to 90 F) |
ST | +18 °C to +38 °C | |
| (64 F to 100 F) | |
T | +18 °C to +43 °C | |
| (64 | F to 109) |
|
|
|
If the room is too cold, it will cause the cooling system in the appliance to switch off for too long. This can cause the internal temperature to rise.
Proper ventilation
The air behind the appliance gets warm. In order to ensure adequate ventilation, you must ensure that the vents are not covered or blocked in any way. Also, the vents must be dusted/cleaned on a regular basis.
Installation
^First remove any cable clips from the rear of the appliance.
^Check that all parts on the rear the appliance are free to move. Remove any obstructions.
^Gently slide the appliance into the desired location. The rear of the appliance can be directly against the wall.
41