Cleaning and care
Cleaning the ice cube tray* (*may vary by model)
Before the ice cubes drop down into the drawer, they are formed in an ice cube tray.
This tray should be cleaned regularly, to remove any stale ice or water.
^Connect the appliance to the power supply.
^Press the on/off button, and the indicator light will now come on.
^Empty the ice cube drawer.
^Hold down the on/off button for the ice cube maker for approx. 10 seconds (after approx. 1 second the ice cube maker will switch off and the indicator light will go out).
The indicator light will now flash.
^Within the next 60 seconds, push the ice cube drawer in as far as it will go.
This will cause the ice cube tray to rotate into an angled position, which makes it easier to clean.
^Wait until the rotation has stopped before continuing.
^Now take the ice cube drawer out of the appliance.
^Clean the ice cube drawer and th eice cube tray with warm water and some mild dish liquid.
^Press the ON/OFF button for the ice cube maker.
The ice cube tray will now return to its original position.
^Now put the ice cube drawer back in the appliance and close it.
The ice cube maker will begin to produce ice cubes again within 6 hours.
If the ice cube maker has not been used for a longer period of time, it is important to clean it before making ice.
Cleaning the exterior coils
^The ventilation slits should be cleaned on a regular basis, with a brush or vacuum cleaner. A
Door seals
Do not use any grease or oil on the door seals, because they will cause the seals to deteriorate over time.
The door seals should be cleaned regularly with clean water and then wiped dry with a soft cloth.
31
