Miele KFN 8992 SD ED, KFN 8993 SDE ED installation instructions Cleaning and care, Before cleaning

Cleaning and care

Never use abrasive cleaners on the appliance, or products that contain acids, bases, or chemical solvents. Note that "non-abrasive" cleaners are also unsuitable, because they can cause matte patches to appear. For all stainless steel surfaces, use a special product (which is available through customer service). Make sure that no water gets into the electronic unit or into the light. Do not let any cleaning water get into the condensate channel or drain hole. Do not use a steam cleaner to clean the appliance. Steam could reach the electrical components and cause a short circuit. Never remove the model plate inside the appliance. It contains important information that is required in the event of a service call.

Before cleaning

^Use the on/off button to switch the appliance off, then unplug it completely from the socket.

^Take any food out of the appliance and store it in a cool place.

^Take out any removable parts, so that they can be cleaned.

^Before cleaning the refigerator shelves, first remove the stainless steel trim from the front side.

Cleaning the exterior, interior and accessories

Use lukewarm water with some mild dish liquid. The accessories and shelves should all be cleaned by hand, except for the butter dish, which is dishwasher-safe.

^Clean the appliance at least once a month.

^Clean the condensate channel and drain hole in the refigerator frequently, so that condensate can drain away properly. You can use a straw or similar item, for example.

^Use a special product to clean the stainless steel surfaces.

^After washing, wipe down the interior and accessories with a clean wet cloth, then dry wih a soft cloth. Leave the appliance doors open for a short while, so the moisture can evaporate.

30