The right temperature
However, if the temperature remains above
Temperature display brightness
When the appliance is delivered, the default brightness for the temperature display is on the lowest setting. Whenever the door is opened or the alarm is triggered, the temperature display will become very bright for approx. 1 minute.
You can adjust the brightness as follows:
^Hold down the superfreeze button for approx. 5 seconds.
The indicator light for the superfreeze button flashes and the temperature display shows ;.
^Keep pressing one of the set temperature buttons until you see ^ in the display.
^Now press the superfreeze button again.
The display will show ^.
^Now you can use the set temperature buttons to adjust the brightness of the display. You can choose a brightness level from 1 to 5, where
1 is the least bright, and
5 is the most bright.
^To save the setting, press the super freeze button.
^To exit from set mode, press the ON/OFF button for the freezer section.
Otherwise, it will automatically return to normal mode after approx. 2 minutes.
Changing the temperature display
The temperature can be displayed in either Celsius or Fahrenheit. When the appliance is switched on for the first time, or after a power failure, the temperature display and setting display for the refrigerator will show the set temperature for five seconds, in either degrees Celsius or degrees Fahrenheit. After this, the actual temperature is displayed.
Changing the temperature display (Celsius/Fahrenheit):
To change the temperature display,
^hold down both the alarm button and the down button for the refrigerator temperature, for seven seconds.
The set temperature display will blink six times.
^Now, while the temperature display is blinking, hold down the alarm button and use the down button for the refrigerator temperature to change the temperature display (Celsius or Fahrenheit).
Once you have changed the selection, the temperature display will blink six times. Then both temperature displays will show the actual temperature.
16
