The right temperature

When you press the buttons, you will see the following changes in the display:

When first pressed: The last temperature selected flashes.

Each subsequent press of the button: adjusts the temperature in increments of 1 °C / 1 F.

Holding down the button will continue to adjust the temperature.

Approximately 5 seconds after you release the button, the current actual temperature of the refrigerator or freezer will automatically be shown.

If you have changed the temperature, you will need to wait approx. 6 hours if the appliance is not very full, or approx. 24 hours if it is full, before checking the temperature display again, because it will take this long for the display to show an accurate temperature. If, after this amount of time, the temperature is too high or too low, you will need to adjust it again.

Temperature range

The temperature can be selected from within the following ranges:

in the refrigerator section from 2 °C to 11 °C (36 to 52 F)

in the freezer section from -14 °C to -26°C (8 to -15 F)

The room temperature and the installation location can affect the time it takes for the appliance to drop to the coldest temperature. If the room temperature is too high, it may not be

possible for the appliance to reach the lowest temperature.

Temperature displays

During normal operation, the temperature display shows the temperature in the middle of the refrigerator section and the temperature in the warmest part of the freezer section.

If the temperature in the appliance is not within the range that the appliance is able to display, (below 0 °C (32 F) for the refrigerator section; above 0 °C (32 F) for the freezer), you will see flashing bars in the temperature displays.

The temperature displays flash under the following conditions:

whenever a different temperature is being set,

whenever the temperature in the appliance has risen by several degrees, indicating that the appliance is warming up too much.

This short-term loss of cooling is no cause for concern in the following cases:

when the door has been left open for a while, for example to take out or put in a large amount of food,

when fresh food is being frozen.

15

Page 15
Image 15
Miele KFN 8993 SDE ED, KFN 8992 SD ED Temperature range, Temperature displays flash under the following conditions

KFN 8993 SDE ED, KFN 8992 SD ED specifications

The Miele KFN 8992 SD ED and KFN 8993 SDE ED are premium refrigeration appliances designed to cater to the needs of modern households while enhancing the overall kitchen experience. Both models boast sophisticated features that not only focus on efficient food storage but also prioritize energy efficiency and user convenience.

Starting with their general design, both models exhibit a sleek, stainless-steel finish that complements any modern kitchen aesthetic. The exterior is not only visually appealing but also easy to clean and maintain, ensuring that your kitchen remains pristine.

One of the standout features of these models is the PerfectFresh Pro compartment, which significantly extends the shelf life of fresh produce and dairy products. This innovative technology maintains optimal humidity levels, keeping your fruits and vegetables fresh for much longer than traditional refrigeration methods. The KFN 8992 SD ED and KFN 8993 SDE ED also include a 0°C zone that is ideal for storing fish and meat, preserving their quality and freshness.

Energy efficiency is another critical aspect where these models excel. Both are equipped with Miele’s Energy Star-rated systems, ensuring that you not only save on electricity bills but also reduce your carbon footprint. The proprietary DynaCool technology circulates cool air evenly throughout the refrigerator, minimizing temperature fluctuations and enhancing energy efficiency.

Moreover, the Miele KFN 8992 SD ED and KFN 8993 SDE ED feature advanced NoFrost technology, which prevents ice build-up in the freezer section. This means you won't have to deal with the hassle of manual defrosting, allowing for effortless maintenance and more usable space in your freezer.

In terms of user-friendly features, both models come with an intuitive ControlDisplay. The electronic controls enable precise temperature setting for different compartments, optimizing the storage conditions based on your needs. Additionally, the models are equipped with LED lighting, illuminating the interior effectively while using minimal energy.

The KFN 8993 SDE ED further enhances the user experience with its integrated wine conditioning zone, which presents an ideal environment for wine storage. Both models also come with easy-to-adjust shelves and door bins, allowing for customized configurations based on the size and type of items stored.

Overall, the Miele KFN 8992 SD ED and KFN 8993 SDE ED are exceptional refrigeration solutions that offer a blend of elegance, efficiency, and practicality. Their innovative technologies make them a valuable addition to any kitchen, catering to the discerning tastes of modern consumers.