Changing the door hinging
Mount the door handles back into place.
The following instructions must be followed when attaching the door handle, because the door seal could be damaged otherwise.
^First, loosely screw the door handle onto the opposite side, using the two forward screws b.
The mounting plate c must be positioned on the door housing in such a way that when the door is closed, the mounting plate is aligned with the outside wall of the appliance. If this alignment is off, you can correct it by
^turning both of the
^Tighten all 4 of the screws b.
^Starting from the appliance side, slide the sidebar d onto the guide for the mounting plate, until it auidbly clicks into place.
You must make sure that the sidebar
ddoes not come in contact with the door seal when the door is opened. This will damage the door seal over time.
If you see that the sidebar is coming into contact with the door seal,
^you must adjust the mounting plate c again, using the set screws a, until the mounting plate and the sidebar d are at the appropriate angle, and the seal is no longer touched when the door is opened.
45
