Section 1 Getting Started | 5 |
System Safety
When running any machining operation, safety is of utmost importance. For proper and safe use of the LC controls and your CNC machine, the following safety guidelines must be followed:
1.Never let the machine run unattended.
2.Any person near a running machine tool must wear safety goggles.
3.Allow only trained people to operate the machine. Anyone operating this machine must have:
∙Knowledge of machine tool operation.
∙Knowledge of personal computer operation.
∙Knowledge of Microsoft Windows ®.
∙Good common sense.
4.Place safety guards around the machine to prevent injury from flying objects. Anaheim Automation highly recommends building a plexiglass safety shield around the entire tool envelope.
5.A
6.Be aware and on alert for computer crashes at all times.
7.Always keep the tool envelope tidy and free of any loose objects.
8.Anaheim Automation is not responsible for the safe installation and use of this product. You and only you are responsible for the safety of yourself and others during the operation of your CNC machine tool. Anaheim Automation supplies this product but has no control over how it is installed or used. Always be careful!
If you do not understand and agree with all of the above safety guidelines, do not use this product.
