Anaheim DPJ72LC3, DPJ72LC2, DPJ72LC4 manual Main Screen Features

8 Section 2 Main Screen Features

Port, and displays the program in the Program Listing Box. By default, the dialog box displays files with an “.AGC” extension.

Close G-Code – Closes the open G-Code file.

Editor - Opens the editor dialog box and displays the current G-Code file. Using this feature you can directly edit any G-Code file without leaving Anaheim Automation’s LC software. Note that you can also double-click the Program Listing Box to open the editor.

Open Setup - Opens a file containing all CNC Setup Parameters for your machine tool. You can set these parameters using commands in the Setup and View menus described below. Setup file names have a “.STP” extension by default.

Save Setup - Saves the current CNC setup parameters under any file name in any directory.

Save Setup As - Prompts you for a file name in which to save the current CNC Setup Parameters.

Import DXF - Directly translates a 2-dimensional DXF file into G-Code for use in Anaheim Automation’s LC software.

Exit - Closes the communications port to the controller, then exits the program.

This does not automatically turn off the controller. You must turn off the controller separately.

Setup Menu

Machine Tool, Feedrate/Ramping, Tooling, Input Lines, Output Lines, Motor Signals, G/M Codes, Import, System Options - Open dialog boxes where you’ll enter your CNC setup parameters, such as the size of your machine tool envelope or the configuration of your LC Controller. These parameters are described in detail later in the manual.