Use
Activating and altering the operating hours counter for the charcoal filter
(...U models only)
The charcoal filter is needed for recirculation mode.
On delivery, the operating hours counter for the charcoal filter is switched off, and is set at unlimited.
For recirculation mode, the operating hours counter needs to be set to the required time:
Press the On/Off control to switch the fan off.
Press the + control and the operating hours control at the same time.
The blue indicator lamp for the operating hours control and one of the
–/ + control lamps will flash.
The
which has been set: |
|
1st lamp from the left = | 120 hours |
2nd lamp from the left = | 180 hours |
3rd lamp from the left = | 240 hours |
4th lamp from the left = | unlimited |
Use the
Confirm the selection by pressing the operating hours control.
All the indicator lamps will go out.
If you do not confirm your selection within 4 minutes, the cooker hood will automatically revert to the "old" data.
Resetting the operating hours counter for the charcoal filter
The indicator lamp for the operating hours control will light up blue after the cooker hood has operated for the number of hours set. The charcoal filter must then be replaced with a new one.
Afterwards, the operating hours counter must be reset.
Press the operating hours control for about 3 seconds while the fan is switched on.
The indicator lamp for the control will go out.
20
