Operation with DSM 400 control module
The Miele DSM 400 control module can be used to combine the cooker hood with other components.
It enables the following:
Potential free connection
This can be used to operate a further appliance via the On/Off button on the cooker hood.
The potential free contact on the
DSM 400 can, for example, be used in a cooker hood with an external motor
...EXT, which is connected to a central ducting system.
The contact can then be used to operate an electrically driven
Components used in the central ducting system are not supplied by Miele.
If in any doubt, the advice of a competent builder or, for gas, a Gas Safe installer must be sought.
Connection to a light switch
The control module can be used to switch on the cooker hood lighting and also to dim it via a light switch in the house.
Installation |
The control module is fitted in the tower after the cover plate has been unscrewed from the ceiling.
The electrical connection of components to the control module must be carried out by a suitably qualified and competent person.
32