Electrical connection
All electrical work should be undertaken by a suitably qualified and competent person in strict accordance with current national and local safety regulations
(BS 7671 in the UK).
Installation, repairs and other work by unqualified persons could be dangerous, for which the manufacturer cannot be held liable.
Ensure power is not supplied to the appliance until after installation or repair work has been carried out.
Do not connect the appliance to the mains electricity supply by an extension lead. These do not guarantee the required safety of the appliance.
The connection data is given on the data plate. (See "After Sales Service"). Ensure that this data matches the household mains supply.
Connection of this appliance should be made via a suitable isolator or a double pole fused spur connection unit which complies with national and local safety regulations and the
When switched off there must be an
If the switch is not accessible after installation (depending on country), an additional means of disconnection must be provided for all poles.
For extra safety it is advisable to install a residual current device (RCD) with a trip current of 30 mA.
Important
This appliance is supplied for connection to an a.c.
230 V single phase 50 Hz supply.
The wires in the mains lead are coloured in accordance with the following code:
Green/yellow | = earth |
Blue | = neutral |
Brown | = live |
WARNING:
THIS APPLIANCE MUST BE
EARTHED
31
