Manuals / Miele / Kitchen Appliance / Ventilation Hood

Miele DAG 500 Installation, Mount the vent collar on the rear of, the ventilation system, motor

Models: DAG 1000 DAG 500 DA 6480 DA 6490

1 40

Page 30

Installation
	Mount the vent collar on the rear of
Plug the connection cable from the	the ventilation system.
ventilation system into the blower
motor.

Mount the blower box to the housing with 4 screws.

Remove the vent collar of the blower box.

Close the opening in the blower box with the cover you removed from the rear of the ventilation system housing. Fasten it with 4 screws.

Page 30

Image 30

Miele DAG 500, DA 6490 Installation, Mount the vent collar on the rear of, Plug the connection cable from the, motor

Contents

DAG 500, DAG Operating and Installation InstructionsDowndraft Ventilation System DA 6480, DA en - US, CAContents Only. Do Not Use To Exhaust IMPORTANT SAFETY INSTRUCTIONSFor General Ventilating Use Hazardous Or Explosive Materials And VaporsTO REDUCE THE RISK OF A COOKTOP GREASE FIRE IMPORTANT SAFETY INSTRUCTIONSEVACUATE AND CALL THE FIRE DEPARTMENT b NEVER PICK UP A FLAMING PAN - You may be burnedIMPORTANT SAFETY INSTRUCTIONS Installation IMPORTANT SAFETY INSTRUCTIONSnot included Functional descriptionwith the internal DAG 500 exhaust blower with the DAG 1000 external blower not includedDescription of the appliance Delayed shut down feature Temperature warning lightPower level settings On/Off button for the retractable vent and fanOperation Selecting the power levelDelayed shut-offfeature Raising the vent / Turning on the fanTemperature warning § OperationCleaning and Care Cleaning the casingStainless steel Grease filters Special instructions for control buttonsCleaning and Care Cleaning the grease filters Cleaning and CareAfter Sales Service RepairsPage Installation Instructions Page Disposal of an old appliance Caring for the environmentDisposal of packing material DANGERAppliance dimensions Exhaust duct connection diameters Appliance dimensionsCabinet dimensions Appliance dimensionsAppliance dimensions aCooktop overhangDAG 500 mounted in front of the exhaust system Installation using the DAG 500 internal blowerAppliance dimensions DAG 500 mounted behind the exhaust systemAppliance dimensions Exhaust air ducting to the frontExhaust air ducting to the rear Installation Installation preparationInstallation Now tighten the brackets on the housingInstalling the DAG 500 blower box on the front InstallationVenting direction towards the rear InstallationMount the vent collar on the rear of InstallationMount the blower box to the housing with 4 screws Plug the connection cable from theInstalling the DAG 500 blower box on the rear InstallationPreparing the electrical connection InstallationInstallation Connect the appliance to the electric power supplyInstallation with the DAG 1000 external blower InstallationExhaust ducting and connections Air extractionDanger of toxic fumes Condensate trap Only for Canada with the DAG 500 Internal blowerAir extraction Electrical connection THIS APPLIANCE MUST BE GROUNDEDElectrical connection if using an external blower Electrical connectionPage Alteration rights reserved M.-Nr.09

￿ Mount the vent collar on the rear of

￿ Plug the connection cable from the

the ventilation system.

ventilation system into the blower

motor.

￿Remove the vent collar of the blower box.

Mount the vent collar on the rear of

Plug the connection cable from the

Remove the vent collar of the blower box.