Manuals / Miele / Kitchen Appliance / Ventilation Hood

Miele DAG 1000, DA 6490, DA 6480, DAG 500 Installation, Now tighten the brackets on the housing

Models: DAG 1000 DAG 500 DA 6480 DA 6490

1 40

Page 27

Now tighten the brackets on the housing.

Installation

With the assistance of another person, lift the appliance into the prepared cutout. The top mounting brackets should rest on the countertop.

Secure the appliance to the countertop with 2 screws.

Alternatively, or additionally, the appliance can also be attached underneath the countertop with the angle brackets provided.

First, loosely screw the brackets into the sliding nuts in the housing, then push them up under the countertop.

Now tighten the brackets on the housing.

Carefully pre-drill the mounting holes into the countertop from underneath. Using screws of the appropriate length.

Level and align the appliance.

Push the bottom mounting bracket on each side down against the cabinet floor.

Mark the top edge of the mounting bracket on the housing and the mounting holes on the cabinet floor.

Page 27

Image 27

Miele DAG 1000, DA 6490, DA 6480, DAG 500 installation instructions Installation, Now tighten the brackets on the housing

Contents

en - US, CA Operating and Installation InstructionsDowndraft Ventilation System DA 6480, DA DAG 500, DAGContents Hazardous Or Explosive Materials And Vapors IMPORTANT SAFETY INSTRUCTIONSFor General Ventilating Use Only. Do Not Use To ExhaustIMPORTANT SAFETY INSTRUCTIONS TO REDUCE THE RISK OF A COOKTOP GREASE FIREEVACUATE AND CALL THE FIRE DEPARTMENT b NEVER PICK UP A FLAMING PAN - You may be burnedIMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Installationwith the DAG 1000 external blower not included Functional descriptionwith the internal DAG 500 exhaust blower not includedDescription of the appliance On/Off button for the retractable vent and fan Temperature warning lightPower level settings Delayed shut down featureRaising the vent / Turning on the fan Selecting the power levelDelayed shut-offfeature OperationOperation Temperature warning §Cleaning and Care Cleaning the casingStainless steel Grease filters Special instructions for control buttonsCleaning and Care Cleaning and Care Cleaning the grease filtersRepairs After Sales ServicePage Installation Instructions Page DANGER Caring for the environmentDisposal of packing material Disposal of an old applianceAppliance dimensions Appliance dimensions Exhaust duct connection diametersAppliance dimensions Cabinet dimensionsaCooktop overhang Appliance dimensionsDAG 500 mounted behind the exhaust system Installation using the DAG 500 internal blowerAppliance dimensions DAG 500 mounted in front of the exhaust systemAppliance dimensions Exhaust air ducting to the frontExhaust air ducting to the rear Installation preparation InstallationNow tighten the brackets on the housing InstallationInstallation Installing the DAG 500 blower box on the frontInstallation Venting direction towards the rearPlug the connection cable from the InstallationMount the blower box to the housing with 4 screws Mount the vent collar on the rear ofInstallation Installing the DAG 500 blower box on the rearInstallation Preparing the electrical connectionConnect the appliance to the electric power supply InstallationInstallation Installation with the DAG 1000 external blowerExhaust ducting and connections Air extractionDanger of toxic fumes Condensate trap Only for Canada with the DAG 500 Internal blowerAir extraction THIS APPLIANCE MUST BE GROUNDED Electrical connectionElectrical connection Electrical connection if using an external blowerPage M.-Nr.09 Alteration rights reserved

￿Now tighten the brackets on the housing.

Now tighten the brackets on the housing.