Miele DAG 500, DA 6490, DA 6480, DAG 1000 Electrical connection if using an external blower

Electrical connection

Electrical connection if using an external blower

If using the external blower, install a connection cable between the ventilation system and the external blower.

Please follow the Operating and Installation Instructions for the DAG 1000.

￿Connect to the power supply as described previously.

￿The external blower will be connected to the additional control cable.

￿Close the terminal box.

￿Turn the power supply back on.

Maximum load

with interior-mounted

DAG 500 vent motor . . . . . . . . . . 420 W

with exterior-mounted

DAG 1000 vent motor . . . . . . . . . 210 W

Voltage . . . . . . . . . . . . . . . . . . . . . 120 V

Frequency . . . . . . . . . . . . . . . . . . 60 Hz

Circuit Rating . . . . . . . . . . . . . . . . . 15 A

￿Additional housing knock-outs should be used for the external blower housing.

￿Install a suitable UL listed cable clamp or conduit fitting into the knock-out.

38