Miele DA 8-2 manual Installation instructions

Installation instructions

Do not install the DA 8-2 directly next to a gas hob.

This extractor is designed for installa- tion between Combiset appliances. It should always be installed between two appliances, such as the grill and deep fryer.

23/16˝
19	5	/16˝
		2	3	/16˝

Prepare the countertop cut-out as il- lustrated.

Dimension ”B“ will vary depending on how many combisets are in- stalled. The following chart gives dimension ”B“ for a variety of 2 zone (ie KM 88-2) and 4 zone (ie KM 93-2) combinations.

	Depth	Width
	(in	(= Dimen-
	mm)	sion B)
		(in mm)
2 zone Combiset
1 combiset	490	265
2 combisets	490	558
3 combisets	490	851
4 combisets	490	1144
5 combisets	490	1437
4 zone Combiset
1 combisets	490	560
2 combisets	490	1143
3 combisets	490	1728
Combination
One 2 zone
+ one 4 zone	490	851
Two 2 zone
+ one 4 zone	490	1143
Three 2 zone
+ one 4 zone	490	1437
One 2 zone
+ two 4 zone	490	1436
Two 2 zone
+ two 4 zone	490	1729

Extractor (e.g. DA 8-2)

For installation between two appliances: - Dimension B increases by 90 mm.

For installation at the end of a combination: - Dimension B increases by 98 mm.

14