Before using for the first time

Setting the water hardness

The steam oven is set at the factory for very hard water (Setting IV).

If your water hardness level differs from this you will need to re-programme the appliance.

You can use the test strip supplied to check the water hardness level, or your local water supplier will be able to advise you of the water hardness of your area.

The water hardness is shown as settings I to IV equivalent to the German scale 1 to >21 °dH (0.2 - 3.8 mmol/l).

 

 

 

Setting

Display

Hardness level

 

 

 

I

Hardness

1-7 °dH

 

level 1

(0.2 - 1.3 mmol/l)

 

 

 

II

Hardness

8-14 °dH

 

level 2

(1.4 - 2.5 mmol/l)

 

 

 

III

Hardness

15-21 °dH

 

level 3

(2.7 - 3.8 mmol/l)

 

 

 

IV

Hardness

>21 °dH

 

level 4

(above

 

 

3.8 mmol/l)

 

 

 

 

 

 

^Switch on the appliance.

^Touch one of the sensors to the right hand side of the arrows until the "Settings" menu appears.

^Touch the sensor next to "Settings".

^Touch one of the sensors to the right hand side of the arrows until the "Water hardness" option appears.

^Touch the sensor next to "Water hardness".

^Touch one of the sensors to the right hand side of the arrows until the water hardness level you want appears.

^Touch the sensor next to the water hardness level you want.

^Touch the sensor next to "OK".

Touch the "+C" sensor to return to the main menu.

17

Page 17
Image 17
Miele DG4080 installation instructions Setting the water hardness, Setting Display Hardness level