Cleaning and care
Proceed as follows:
^Wait until the appliance has cooled down.
^Close the door and switch on the empty appliance.
The k symbol, the Descale programme symbol k and a number will appear in the programme/temperature display.
^Press the Start/Stop button.
E00 will appear in the programme/temperature display, the k symbol will appear on the left hand side and the Descale programme symbol k will also appear.
The appliance will start to drain. Once the draining process is complete, E01 will appear in the programme/temperature display.
^Fill the syringe supplied with water. Press the nozzle into the opening on the top left of the front of the appliance (see arrow) and inject the water slowly and evenly. Make sure you keep the nozzle horizontal.
^Now fill the syringe with the descaling agent supplied and inject it into the opening.
^Then fill the syringe with water and inject the water into the opening. This needs to be done twice.
You will then hear a beep and E02 will appear in the programme/temperature display. The machine is preparing itself for the descaling procedure.
If you do not hear the signal you must not inject any more water into the system!
Wait for five minutes. If the signal still does not sound you should switch the machine off and then back on again (see the "Problem solving guide").
When the appliance is ready to begin the descaling process, a beep will sound and E03 will appear in the programme/temperature display.
^Now fill the syringe with descaling agent and inject the contents of 2 full syringes into the opening.
^Then fill the syringe with water and inject the water into the opening. This needs to be done twice.
You will then hear a beep and E02 will appear in the programme/temperature display. A descaling duration of 30 minutes will appear in the time display. This time cannot be altered.
48
