![](/images/new-backgrounds/1070141/7014179x1.webp)
Safety features
Overheating protection
The overheating protection device is located on the
The cooling down phase will be completed in approx. 1 minute and several beeps will sound. F27 will flash in the programme/temperature display for a short while and then three horizontal bars - - - will appear. After a while F20 will appear in the display.
Proceed as follows:
^Switch the appliance off and open the door.
^Allow the appliance to cool down for approx. 30 minutes.
F20 will disappear from the display during this time.
^Remove the overheating protection device cover cap (see arrow). Use a screwdriver or similar to press the button underneath in again.
^Replace the cover cap.
The steam oven can now be used again in the normal way.
If the overheating protection device trips again, contact the Service department.
40