![](/images/new-backgrounds/1070141/7014195x1.webp)
Cleaning and care
Proceed as follows:
^Wait until the appliance has cooled down.
^Press the nozzle out of the plunger on the syringe supplied and attach it to the spout of the syringe as shown.
^Close the door and switch on the empty appliance.
The k symbol, the Descale programme symbol k and a number will appear in the programme/temperature display.
^Press the Start/Stop button.
E00 will appear in the programme/temperature display, the k symbol will appear on the left hand side and the Descale programme symbol k will also appear.
The appliance will start to drain. Once the draining process is complete, E01 will appear in the programme/temperature display.
^Fill the syringe with water. Press the nozzle into the opening on the top left of the front of the appliance (see arrow) and inject 1 syringe of water slowly and evenly. Make sure you keep the nozzle horizontal.
^Pour 300 ml of the descaling agent supplied into a suitable
^Now fill the syringe with descaling agent from the container, and inject the contents of 1 syringe into the opening.
^Then fill the syringe with water and inject the water into the opening. This needs to be done twice.
You will then hear a beep and E02 will appear in the programme/temperature display. The machine is preparing itself for the descaling procedure.
If you do not hear the beep, do not inject any more water into the system.
Wait for five minutes. If the beep still does not sound you should switch the machine off and then back on again (see "Problem solving guide").
48