Installing the appliance
^Connect the appliance to the power supply and turn it on. After several seconds the indicator light will come on.
The indicator light will display different colors one after the other; any control light at the end indicates that the module was correctly installed.
If the indicator light does not come on, installation of the module was unsuccessful. In that case, repeat the process. If that does not correct the problem, contact Miele.
^ Pull the antenna d straight out. |
^Guide the cover b over the antenna d and screw on the cover.
^Angle the antenna d so that it faces to the right or left.
If necessary, disconnect the power supply and continue installing the appliance.
Preparing the installation niche
Keep the appliance door closed until it is securely fastened in the niche. Tipping hazard.
If the installation niche is deeper than the appliance, a solid wooden beam a can be placed behind the
The length of the wooden beam a should be to the width of the installation space.
If possible, always screw the wooden beam into existing studs.
61
