Installing the appliance
^ Pull the rear cover forward and out. |
^To remove the drip tray, begin by carefully unclipping the water sensors, then bend them gently upward.
Once the drip tray has been removed, the four aligners can be accessed to adjust the Ice/Water Dispenser to your liking.
^Loosen the screws of the four clamps.
^Insert a screwdriver into one of the four slots and push sideways until the dispenser is aligned with the custom door (the gray arrow will adjust to the rear; the black arrow will adjust front).
^
^Insert the drip tray back into place, then clip the water sensors back onto the drip tray.
^Replace the rear cover, panel and screw.
^Replace the drip tray and cover.
^Finish by putting theplastic grill, cover, and dispenser back into place.
74
