Installing the appliance
^Mark the distance X on the
^Also calculate and mark the center of the custom door Y.
^Remove the mounting frame from the appliance door and position it according to the markings on the custom door.
^
^Tightly screw on the bracket using the
Attach the bracket to each attachment point with at least one screw.
^Attach the bracket at the top with at least 6 screws.
The bracket includes a variety of holes for the various design options of custom doors.
When performing work on the custom door, always observe the following:
–Always select the best
–Always select a screw length that is shorter than the thickness of the door front.
Attaching and aligning the custom door front
^Fit the door handle to the custom door. Note that the screws are applied from the reverse side.
^Open the door and hang the custom door with the adjusting rail over the
^Screw the nuts q a few turns onto the
^Close the door.
69
