Operating peripheral equipment using the remote control
Programming The Illuminated Remote Control Using Access Codes
The remote control can be preset for other manufactures, by utilizing the REMOTE MODE SELECTION BUTTONS for CABLE, DTV, VCR, RCVR (a Receiver or Amplifier), DVD (DVD, CD, LD) ,DBS and AUX (for Cassette Player or a VCR2.)
(Details on remote control buttons to operate peripheral equipment 
See page 65 to 67 and 68 to 70)
1 Setting up the remote using the numerical keys.
LIGHT
POWER
ASPECT
MUTETV/VIDEO
DVD | AUX |
VCR | RCVR |
DTV | CBL |
| DBS |
(When code known):
1 POWER
+
Press and hold the POWER and ACTION keys simultaneously for three full seconds.
After 3 seconds, all the illuminated mode keys will begin to flash. Then let go of the POWER and ACTION keys.
TV | CH |
|
VOL | ACTION | VOL |
MENU |
| INFO/RECALL |
| CH |
|
NORMAL GAME |
CH
VOL ACTION VOL
CH
EXIT | VCR REC | GUIDE | |
REW | SEARCH | PLAY | SPLIT |
STOP | FF | ||
FREEZE |
|
| SWAP |
TV/VCR | VCR/DBS | CHANNEL | PAUSE |
OPEN/CLOSE | SLOW | STILL | |
1 2 3
4 5 6
7 8 9
0
2 | DVD | AUX |
VCR | RCVR | |
| DTV | CBL |
| TV | DBS |
3 1 2 3
4 5 6
7 8 9
0
Press the desired mode key.
The mode key will illuminate steadily , all others will go out.
Enter the three digit set up code, by using the Remote Control Keyboard.
If the correct code is entered, the mode key will blink twice and then go out.
Now your remote is set for this code.
Device | Operate | Default |
TV | TV (Only Panasonic) | Panasonic Code |
VCR | VCR (Preset) | Panasonic Code |
CBL | Cable Boxes (Preset) | Panasonic Code |
DBS | DBS Boxes (Preset) | Panasonic Code |
RCVR | RCVR (Preset) | Technics Code |
AUX | Cassette Players, V CR2 (Preset) | Technics Cassette Players Code |
DVD | DVD & LD & CD Player (Preset) | Panasonic DVD Code |
DTV | STB (Only Panasonic) | Panasonic Code |
Note:
If an incorrect number is entered (or there is an incomplete entry after 28 seconds), the key illumination goes out (no blink) and setting are unchanged.
63
