Panasonic PT 52DL10 Analog RGB signals that can be input, Display mode name No. of dots H ⋅

Installation

Analog RGB signals that can be input

The table below lists the different types of analog RGB signals that can be input.

If a signal which differs greatly from any of the types listed below is input, the picture image may not be displayed correctly, or black background may displayed.

Display mode name	No. of dots (H ⋅					V)		Horizontal scanning			Vertical scanning
									frequency (kHz)			frequency (Hz)
VGA400			640 ⋅		400		24.8			56.4
				640 ⋅	400		31.5			70.1
VGA480			640 ⋅		480		31.5			59.9
				640 ⋅	480		35.0			66.7
				640 ⋅	480		37.9			72.8
				640 ⋅	480		37.5			75.0
				640 ⋅	480		43.3			85.0
SVGA			800 ⋅		600		32.1			51.0
				800 ⋅	600		35.2			56.3
				800 ⋅	600		37.9			60.3
				800 ⋅	600		48.1			72.1
				800 ⋅	600		46.9			75.0
				800 ⋅	600		53.7			85.1
XGA		1024 ⋅			768		48.4			60.0
				1024 ⋅	768		56.5			70.1
				1024 ⋅	768		60.0			75.0
MAC16			832 ⋅		624		49.7			74.6

Note:

The number of dots for this set is 800 ⋅ 600 for NORMAL display. Number of dots other than 800 ⋅ 600 in the above data, will be converted to 800 ⋅ 600 (with the exception of MAC 16, which will be displayed in 832 ⋅ 624 dots).

15