Operating peripheral equipment using the remote control
2Setting to the remote using the step and set method
(When code not known):
LIGHT
POWER
ASPECT
MUTETV/VIDEO
| DVD | AUX | RCVR |
VCR |
| CBL | |
| DTV |
| |
TV | CH |
| DBS |
VOL | ACTION | VOL | |
MENU |
|
| INFO/RECALL |
| CH |
|
|
EXIT | VCR REC | GUIDE | |
REW | SEARCH | PLAY | SPLIT |
STOP | FF | ||
FREEZE |
|
| SWAP |
TV/VCR | VCR/DBS | CHANNEL | PAUSE |
OPEN/CLOSE | SLOW | STILL | |
1 2 3
4 5 6
7 8 9
0
1
VOL
2 | VCR |
| TV |
3
VOL
4
POWER
+
CH
ACTION
| CH |
DVD | AUX |
DTV | CBL |
CH
ACTION
CH
CH
VOL
RCVR DBS
VOL
Press and hold the POWER and ACTION keys simultaneously for three full seconds.
After 3 seconds, all the illuminated mode keys will begin to flash. Then let go of the POWER and ACTION key.
Press the mode key.
The mode key will illuminate steadily , all others will go out.
Press VOL “ 
” key to step to the next code. Press POWER to send a test signal in that format.
Continue doing this until the proper device code is found, And the target device responds.
Once the code has been found, press the ACTION key to lock it in.
VOL ACTION VOL
CH
Notes:
•The step and set mode will start from the current device (not the beginning of the library, except for the first time).
•The step and set mode works in the reverse direction using the VOL “ 
” key.
Infrared Remote Codes for Specific Components
Helpful Hint: Write down the code numbers for your components in the space provided below. This will serve as a handy reference whenever you need to reprogram your remote control.
CABLE | VCR | CD |
Cable Box | Video Cassette Recorder | Compact Disc Player |
DBS | RCVR | LD |
Digital Broadcast System | Receiver or Amplifier | Laser Disc Player |
Other Component | Other Component | Other Component |
Other Component | Other Component | Other Component |
64 |
|
|
