CLOCK
CLOCK is valid only during PC mode.
When an RGB signal is projected, minor adjustments of the dot clock frequency and adjustments of the phase can be made.
Adjusting the clock
When the set is connected to the PC, CLOCK can be adjust.
1Connect a computer to the projection TV.
2MENU
Press to select the PC mode.
3 TV/VIDEO
Press to display the MENU screen.
PC
MENU
ADJUST CUSTOM SET UP
PICTURE
PICTURE ADJUST
POSITION/SIZE
CLOCK
AUDIO
AUDIO ADJUST
1 Press the MENU button to display the MENU screen and select CLOCK.
CH
Press to select to CLOCK.
MENU
ADJUST CUSTOM SET UP
PICTURE
PICTURE ADJUST
VOL ACTION
CH
2 CH
VOL ACTION
VOL
Press to display the CLOCK screen.
Press to select the CLOCK PHASE or
DOT CLOCK.
Adjust the level.
VOL
POSITION/SIZE
CLOCK
AUDIO
AUDIO ADJUST
PAGE ACTION | SELECT |
EXIT |
|
CLOCK |
|
| NORMAL |
CLOCK PHASE | 0 |
DOT CLOCK | 0 |
CH
MENU
Press to exit menu.
ADJUST ACTION | SELECT |
EXIT |
|
CLOCK PHASE: 0 –15
DOT CLOCK:
DOT CLOCK: | Minor adjustments of the dot clock frequency |
| When a PC signal is projected, the display area of the computer image can be adjusted. |
CLOCK PHASE: | Phase adjustment |
| Flickering or bleeding of the contour appearing on the screen when projecting a PC signal, can be |
| adjusted so that it does not appear. |
Notes:
•NORMAL is displayed at default. When settings are altered, the display changes to NORMALIZE.
•The DOT CLOCK advances in increments of 2.
60
