Installing the appliance

Note:

Do not twist or jam the appliance inside the niche. When unscrewing the height-adjustable feet, proceed gradually, alternating between left and right.

The adjustment of the rear feet is aided if the appliance is lifted at the rear (tipped forward slightly).

If using a wooden beam as an alternative anti-tip device, rotate the appliance all the way toward the wooden beam.

Do not use a power tool to adjust the rear feet!

Attaching the appliance to the installation niche

^

Pull out the plate side lugs i.

^

Secure the attachment plate side lugs.

If there is a fairly large gap above the appliance, cut a wooden beam to fit exactly and place it in the gap.

^Screw the attachment plate lugs h to the overhead furniture/fixtures.

If there is no way to attach the top of the appliance, it can be attached to the sides of the installation niche.

^If necessary, shorten the filler strip j to the required height.

^Place the 2 strips on top of each other k.

^Insert the filler strip until you hear it click into place l.

66

Page 66
Image 66
Miele F 1471 VI installation instructions Attaching the appliance to the installation niche