Manuals / Miele / Kitchen Appliance / Dishwasher

Miele G5975, G 5970 Problem Possible fault Solution Optical interface, Flashes fast, the buzzer

Models: G5975 G 5970

1 88

Download 88 pages 44.77 Kb

Page 58

Frequently asked questions

Problem	Possible fault	Solution
The optical interface		Before trying to remedy the
flashes fast, the buzzer		fault:
sounds or the display		– Turn the dishwasher off
shows the fault:			with the button.
Technical fault FXX	There may be a	After a few seconds:
	technical fault.	– Turn the dishwasher on.
		–	Select the desired
			program.
		–	Close the door.
		If the problem persists,
		contact Technical Service.
Waterproof fault F70	The waterproof system	– Turn off the water supply.
	has activated.	Contact Miele Technical Ser-
		vice.
Automatic door closing	The door may be	–	Remove the item, if
fault F32	blocked.		necessary restart the
	blocked.		necessary restart the
			program.
		If the message shows again
		contact Miele Technical Ser-
		vice.
Automatic door opening	Possible technical fault.	–	Open the door by hand
fault F33			and restart the program.
			and restart the program.
		If the message shows again
		contact Miele Technical Ser-
		vice.

58

Image 58

Miele G5975, G 5970 Problem Possible fault Solution Optical interface, Flashes fast, the buzzer, Sounds or the display

Contents

Operating Instructions Dishwasher 5970 G Important Safety Instructions ContentsContents Electrical Safety Correct usageInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingTo open the door Before using for the first timeTo close the door Display function Welcome screen Language settingClock format Time of day Water hardnessRinse aid and/or Add salt may Filling the salt container Salt refill message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Glassware Items not recommended for dishwashingSilver and aluminum Typical load for 10 place settings with cutlery tray Typical load for 16 place settings with cutlery tray Foldable spikes Upper basketHinged cup rack Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket Dishwasher with cutlery tray Heavily soiled itemsTo replace the insert Removable MultiComfort insertTo remove the insert Glass rackVase / Bottle insert Cutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Turning on Selecting a programProgram guide When to use Program sequence Usage Normally soiled dishwareSelecting options Starting a program Time displayStandby At the end of a programPreparing your appliance for an extended vacation Interrupting a programChanging a program Delay start Additional optionsStarting a program before the delay start has elapsed BrilliantLight Settings menu allows you to adjust standard settings SettingsOpening the Settings menu Time of day Setting the clock formatLanguage Set the time of dayWater hardness Adjust Sensor Wash Drying PlusRefill display Optimize standbyCheck filters Reorganize programs Save options TemperatureBuzzer Memory Keypad toneBrightness RemoteVisionShowroom program Factory defaultLeaving the Settings menu Turning the Showroom program onRemoteVision Frequently asked questions Technical faultsFlashes fast, the buzzer Problem Possible fault Solution Optical interfaceShows the fault Sounds or the displayProblems water intake/drain Program Energy FaultFlashes fast Saver displaysGeneral problems with the dishwasher A program Problem Possible fault Solution Detergent is leftDispenser at the end Detergent lidSounds Poor cleaning results Cutlery are Problem Possible fault Solution Dishes are not dryGlasses SpottedDiscoloration film Cannot be wiped off Glasses are dull Problem Possible fault Solution Glasses have aBrown or blue Discolored filmRepairs After sales servicePC Update MieleCareTransport User Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door sealIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Cleaning the spray arms Removing the spray armsInstalling an in-line water filter Cleaning the water inlet filterCleaning the filter Cleaning the drain pump and non-return valve Installation Instructions Disposal of the packing material Help to protect the environmentDisposal of an old machine Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Drainage PlumbingVenting the drainage system Noise measurement Installation requirements for measuring noiseGeneral requirements for measuring noise Noise measurement Page Page Page Alteration rights reserved Nr 909 281 G5970/G5975