Keypad tone, Brightness, Memory, RemoteVision | Miele G5975, G 5970

Settings

Keypad tone

A tone will sound when a button is pressed.

The volume can be set to 17 different levels.

Select the desired setting and confirm with OK.

Brightness

The display brightness can be adjusted in 17 levels.

Select the desired brightness and confirm with OK.

Memory

The memory function allows you to save the last selected program.

When turning the dishwasher off and on again after a program has finished or opening and closing the door, the last selected program is displayed instead of the main menu.

The function is turned on by default.

Select the desired option and confirm with OK.

RemoteVision

(Optional accessory.

To learn more about RemoteVision visit www.miele.com.)

Select to show module state.

If " module connected and ready" is displayed, no further action is required.

Via the "Options" menu you can:

–Reboot the module

–Reset the factory default settings

–Enter Ad-Hoc mode

Refer to the "RemoteVision" section of this manual or the RemoteVision Installation manual for further instructions.

54

Image 54

Miele G5975, G 5970 operating instructions Keypad tone, Brightness, Memory, RemoteVision

Contents

Operating Instructions Dishwasher 5970 G Important Safety Instructions Contents Contents Electrical Safety Correct usage Installation Use Save These Instructions Disposal of an appliance Guide to the dishwasher Control panel Caring for the environment Energy saving washing Before using for the first time To open the doorTo close the door Display function Language setting Welcome screenClock format Time of day Water hardness Rinse aid and/or Add salt may Filling the salt container Salt refill message Rinse aid Adding rinse aid Rinse aid indicator Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings with cutlery tray Typical load for 16 place settings with cutlery tray Upper basket Foldable spikesHinged cup rack Jumbo cup rack Universal support bar Adjusting the height Adjusting the upper basket Lower basket Dishwasher with cutlery tray Heavily soiled items To replace the insert Removable MultiComfort insertTo remove the insert Glass rack Vase / Bottle insert Cutlery Split cutlery tray Cutlery basket Cutlery insert for the cutlery basket Optional accessories MieleCare Collection Use Detergent Adding detergent Turning on Selecting a program Program guide When to use Program sequence Usage Normally soiled dishware Selecting options Starting a program Time display Standby At the end of a program Preparing your appliance for an extended vacation Interrupting a program Changing a program Delay start Additional options Starting a program before the delay start has elapsed BrilliantLight Settings Settings menu allows you to adjust standard settingsOpening the Settings menu Time of day Setting the clock formatLanguage Set the time of day Water hardness Adjust Sensor Wash Drying Plus Optimize standby Refill displayCheck filters Reorganize programs Temperature Save optionsBuzzer Memory Keypad toneBrightness RemoteVision Showroom program Factory defaultLeaving the Settings menu Turning the Showroom program on RemoteVision Frequently asked questions Technical faults Flashes fast, the buzzer Problem Possible fault Solution Optical interfaceShows the fault Sounds or the display Problems water intake/drain Program Energy FaultFlashes fast Saver displays General problems with the dishwasher A program Problem Possible fault Solution Detergent is leftDispenser at the end Detergent lid Sounds Poor cleaning results Cutlery are Problem Possible fault Solution Dishes are not dryGlasses Spotted Discoloration film Cannot be wiped off Glasses are dull Problem Possible fault Solution Glasses have aBrown or blue Discolored film Repairs After sales servicePC Update MieleCare Transport User Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door seal Indicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Cleaning the spray arms Removing the spray arms Cleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Electrical connection Grounding Instructions Hardwired electrical connection Grounding Instructions This Appliance Must be Grounded Plumbing Plumbing DrainageVenting the drainage system Installation requirements for measuring noise Noise measurementGeneral requirements for measuring noise Noise measurement Page Page Page Alteration rights reserved Nr 909 281 G5970/G5975