Miele G 7893 Protecting the countertop

Positioning and securing the

machine

To ensure stability the washer must first

be aligned and then secured to the

countertop.

^Open the door.

^Screw the washer to the countertop

through the left and right holes in the

front trim.

Do not use silicone sealant to seal

the gaps between the machine and

any neighboring cabinets/

appliances. This will block

ventilation to the circulation pump.

Protecting the countertop

Important for machines with steam

condenser (depending on model):

To prevent steam damage to the

countertop, adhere the protective foil

913/16"x2213/16"(25x58cm)

underneath the countertop near the

steam condenser.

Cover plate (protects the countertop)

Depending on the requirements for

installation, a cover plate can be

ordered from Miele.

This protects the underside of the

countertop from steam damage.

Installation

Contents

Main Page Contents Page Page Page ~ SAVE THESE INSTRUCTIONS Description of the machine Page Guide to the lab washer Electric door lock To open the door , To close the door Emergency release Opening and closing the door Setting the water softener Settings *) factory setting Filling the salt reservoir , Salt indicator Adding rinse aid Rinse Aid Rinse aid indicator light Setting the rinse aid dosage Rinse Aid Adding neutralizer Neutralizing agent Neutralizer indicator light Neutralizing agent Adding detergent , Liquid detergent Using powdered detergent Detergent , Loading the machine , Spring adapter for the water connection Adjusting the upper basket Laboratory equipment Page Page Turning on Starting a program Selecting the (optional) drying function Program sequence display End of a program Turning off Canceling a program , Program Guide Program sequence Program Guide The following instructions apply to all programming functions: DOS 1 (liquid detergent) DOS 3 (neutralizer) Buzzer Changing program parameters Page Restoring the factory settings Setting the time and date Resetting the filter timer of the drying system , Data transfer (optional) Routine checks Maintenance , Cleaning the filters in the wash cabinet , Page Cleaning the spray arms Cleaning the drain pump and non-return valve , Cleaning the water inlet filters , Drying system maintenance Cleaning the control panel , Cleaning the exterior , Cleaning the wash cabinet Cleaning the door seal Dispensing systems Baskets and inserts , Page Page Page Page Page Page Page Page Thermo switch After Sales Service Page Page , Undercounter installation Installation Protecting the countertop , WARNING THIS APPLIANCE MUST BE GROUNDED Grounding connection Electrical connection Connecting the water inlet , Page Drainage Technical data Disposal of the packing materials Disposal of an old appliance Caring for the environment