Miele G 7893 installation instructions Program Guide, Inorganica

Program Guide

Program	Description
Custom	Open program available for programming by end user.
INORGANICA	For removing inorganic residue;
	generally for analytical applications, for light to moderate soiling, with moderate
	to high rinse requirements.
ORGANICA	For removing organic residue, such as oils, fats, wax, agar, preparation
	applications and for some analytical applications, with moderate to heavy soiling,
	and moderate rinse requirements. Liquid detergent required, cold, warm, and a
	DI water supply is recommended.
STANDARD	For a wide range of soiling types that do not denature or precipitate in alkaline
	environments, for some preparation and analytical applications, for light soiling,
	and low rinse requirements.
UNIVERSAL	For removing organic residue (such as proteins, oils and some fats) and some
	inorganic residues (pH 7, water-soluble metallic salts), for preparation
	applications and for some analytical applications, moderate to heavy soiling and
	moderate rinse requirements.
INTENSIVE	For removing organic residue (such as proteins, cell and tissue cultures, oils and
	some fats) and some inorganic residues (pH 7, water-soluble metallic salts), for
	preparation applications and analytical applications, moderate to heavy soiling,
	and moderate to high rinse requirements.
PLASTIC	For temperature-sensitive labware, such as plastic bottles (minimum required
	temperature resistance 55°C, for preparation applications and for some
	analytical applications, for light to moderate soiling, for moderate rinse
	requirements.
DRAIN	To pump away water, for example when a program is canceled.
RINSE	To rinse heavily soiled labware, e.g., to pre-treat heavy soiling, remove residue or
	to avoid drying and encrusting before a full program is run.
varioTD	For cleaning and thermal disinfection at 93 °C with 5 min holding time (as per
	EN ISO 15883-1).
SPECIAL	For cleaning and thermal disinfection at 93 °C with 10 min holding time (as per
93°C - 10'	¶ 18 of Germany's infectious disease control act, section A/B, fungicidal,
	bactericidal, and virus-inactivating).

CW = cold water, HW = hot water, DI = distilled water, °F (C°) = Temperature, min = holding time * The DOS 2 rinse aid dosage must be activated by Miele Technical Service

32