Miele H 4681 Before using for the first time, Calibration of the baking sensor

Before using for the first time

The oven will switch on automatically when it is connected to the electricity supply.

A welcome screen will appear in the display and you will then be requested to select some basic settings which are needed to set up the appliance up for using for the first time.

Follow the instructions in the display.

The welcome screen will be replaced by the Language request menu.

^Keep pressing the sensor to the right of the arrows until the language you want appears in the display.

^Touch the sensor on the left hand side of the language you want.

A tick L will appear beside the language you have selected.

^Touch the sensor next to "Continue" to confirm your selection.

The request to select a Clock format will appear.

^Select the clock format you want

(12 hour or 24 hour) and confirm this with "Continue".

You will then be requested to enter the Time of day.

You can either use the sensors next to + and - or the numerical keypad to enter the time.

^First enter the hour and confirm with "Continue". Then enter the minutes and confirm with "Continue".

If you are using the keypad to enter the time you can enter the minutes immediately after entering the hour.

You will then be asked if you want the display to Always show the time or for the time of day to be displayed only when the oven is in use.

^Select the option you want.

After you have confirmed your selection with "Continue", the display will show messages to tell you that:

–your appliance is set up ready to take the Mielehome system.

–setting up for using for the first time has been successfully completed.

Your oven is ready for use as soon as you confirm the last message with "OK".

Calibration of the baking sensor

The built-in baking sensor will start to calibrate after the setting up process has been completed. If you try to operate the oven during the calibration process, a message telling you that the baking sensor is being calibrated will appear in the display.

The process will take about five minutes.

During this time the sensor electronically measures conditions in the oven and sets itself accordingly.

This measurement is repeated at regular intervals to ensure that conditions in the oven are monitored continually.

18