Miele H 4681 installation instructions Installing the oven

Installing the oven

To ensure adequate ventilation to the oven once installed:

-provide a ventilation cut-out in the housing unit as illustrated.

-do not fit a rear panel into the housing unit.

-do not fit insulation material inside the housing unit.

Important:

Remove the protective cork spacers from the sides of the oven before installation.

Turn off the mains electricity supply to the isolator.

^Connect the mains cable from the oven to the isolator.

^Push the oven into the furniture housing unit as far as the oven trim, and align it.

^Open the oven door, and with two screws secure the oven to the side walls of the furniture housing unit through the holes in the oven trim.

^Reconnect the electricity supply to the isolator.

The appliance must only be operated when it has been built in. Otherwise it poses an electric shock hazard.

56