Installing the appliance
Preparing the custom door
Open the appliance door.
Unscrew the installation supports from the appliance door.
Loosen the remaining screws from the strips on each side of the door, then remove.
Set aside the screws and side strips - you will need them again later.
Remove the light switch cover (see arrow).
Close the appliance door.
Measure the distance X between the bracket from the door and the overhead furniture/fixtures.
Loosen the two nuts.
Set aside the nuts - you will need them again later.
With the inside facing up, lay the custom door on a stable surface (to avoid scratch marks, place some plastic or a cloth on the surface).
56
