Installation
Stainless steel panels
Stainless steel door panels and
Custom door panels
This appliance is compatible with all styles and designs of kitchen cabinetry.
The total weight of the decorative panel(s) must not exceed the following:
K 18x1 Vi. . . . . . . . . . . . 110 lbs (50 kg)
K 19x1 Vi. . . . . . . . . . . . . 81 lbs (37 kg)
Installation options
There are many different installation options. These are limited only by the design of the kitchen.
The door hinge cannot be exchanged.
Single column
The appliance can be installed at any preferred location in the kitchen.
However, be sure the door will open and close properly in the chosen location.
Side-by-side
This appliance can be installed
The "Merging Kit" is available from Miele.
Contact Miele or your dealer for specific information about which combinations will work with your appliance.
For instructions on how to attach the appliances and install the heating mat, please refer to the instructions included with the "Merging Kit", available from Miele.
Installation without a partition using the "Merging Kit"
If the appliances are installed directly next to each other (without a partition), they need to be attached together using the "Merging Kit".
39
