Maytag UMV1152CA B.OUTSIDE TOP EXHAUST Vertical Duct, B1.ATTACH THE MOUNTING PLATE TO THE WALL

Installation Instructions

Installation Instructions

B.OUTSIDE TOP EXHAUST (Vertical Duct)

INSTALLATION OVERVIEW

B1.	Attach Mounting Plate to Wall
B2.	Prepare Top Cabinet
B3.	Adjust Blower
B4.	Check Damper Operation
B5.	Mount Microwave Oven
B6.	Adjust Exhaust Adaptor
B7.	Connect Ductwork

B1. ATTACH THE MOUNTING PLATE TO THE WALL

Attach the plate to the wall using toggle bolts. At least one wood screw must be used to attach

the plate to a wall stud.

1.Remove the toggle wings from the bolts.

2.Insert the bolts into the mounting plate through the holes designated to go into drywall and reattach the toggle wings to ¾" onto each bolt.

To use toggle bolts:

Spacing for Toggles More

Than Wall Thickness

	Toggle Wings
Mounting		Toggle
Plate		Bolt

Wall

Bolt End

3.Place the mounting plate against the wall and insert the toggle wings into the holes in the wall to mount the plate.

NOTE: Before tightening toggle bolts and wood screw, make sure to coincide bottom line of the Mounting plate with Horizontal line of “Rear wall Template” and then the Mounting plate is properly centered under the cabinet.

CAUTION: Be careful to avoid pinching fingers between the back of the mounting plate and the wall.

4.Tighten all bolts. Pull the plate away from the wall to help tighten the bolts.

14

© 2006 Maytag Services 16027303 A – 15