Miele K 9212 I Building in the appliance, Building into a peninsular run, Preparing the appliance

Models: K 9212 I K 9412 I

1 48
Download 48 pages 29.95 Kb
Page 43
Image 43
Building in the appliance

Building in the appliance

All building-in instructions given are for a right hand hinged appliance. If you have converted the appliance to left hand hinging you will need to adapt these instructions accordingly.

Building into a peninsular run

When built into a peninsular run, the rear of the building in niche must be fitted with a kitchen furniture panel.

Aligning the housing unit

Before installing the appliance, the housing unit must be carefully aligned using a spirit level. The housing unit corners must be at right angles, as otherwise the appliance furniture door will not align correctly with the 4 corners of the unit. Align the furniture door with the hinges.

Preparing the appliance

^Slide cover strip a into the holder as shown, with the bumps facing downwards. The bumps will fit into keyhole slots b. The cover strip is then flush with the side of the appliance on which the door is opened c.

43

Page 43
Image 43
Miele K 9212 I, K 9412 I Building in the appliance, Building into a peninsular run, Aligning the housing unit