![Changing the door hinging](/images/new-backgrounds/65841/6584181x1.webp)
Changing the door hinging
Before building the appliance in, you will need to decide on which side the door is to be hinged. If left hand door hinging is required, follow the instructions below.
To change the door hinging, you will need various sizes of Torx screwdrivers and a slotted screwdriver.
Appliance door
^ Open the appliance door. |
^Pull off covers a and b.
^Unscrew hinge pin c.
^Tilt the door, and lift it off.
^Unscrew hinge plate d, and replace it on the opposite side using the same screws.
^Remove lower hinge pin e together with washer f, and replace these on the opposite side.
The freezer compartment door now needs to be changed over if applicable (see following page).
^Replace the appliance door on lower hinge pin e.
^Insert upper hinge pin c into the outer hole in hinge plate d, and screw securely into the top of the door.
^Replace covers a and b on the opposite side, turning them by 180 °.
41