Building in the appliance
Securing the appliance and fitting the furniture door
^Push the appliance against the housing wall on the side on which the door opens so that the sealing strip is pressed into the housing wall h.
^Secure the appliance at the top with screw i (4 x 19 mm) into bracket b, pushing the appliance against the furniture wall as you do so, then secure it at the bottom with screws j (4 x 36 mm) through the adjusting screws in the hinge plates on the housing.
^Tighten all the screws.
^If necessary, align cover strip k by pushing it parallel to the top of the unit - it should not protrude.
^Fold in the side section of bracket b.
^Replace cover a, and cap all the holes with stoppers l and m.
^Secure door fixings n to the appliance door with screw o
(3.9 x 9.5 mm), to suit the position of the handle,
Very large doors will require several door fixings.
^Open the doors right out, and push fixing guides p into door fixings n.
^Position the furniture door onto the appliance door, and secure fixing guides p to the furniture door using screws q (4 x 14 mm). Maintain a distance d (= the thickness of the housing unit walls) between the edge of the appliance door and outer edge of the furniture door.
^Align the door fixing so that the furniture door on the side with the handle does not lie against the housing unit wall when the door is shut. A minimum distance of 1 mm must be maintained.
^Cap the empty holes on the appliance door with stoppers r supplied; this is vital for the
45
