Using the cooktop
Safety feature
This appliance is equipped with an Ignition Safety Control. This control cuts the gas supply if the flame goes out and reignition is unsuccessful.
^To reignite the burner, turn the control knob to “ß”, then follow the procedure outlined in “Turning on and off / Regulating”.
This safety feature is not operated by electricity, it will be active even if the appliance is in use during a power failure.
Using the cooktop during a power failure
If there is an interruption to the electrical supply the gas can be ignited using a match.
^Press down and turn the desired control knob counterclockwise to the largest flame symbol.
^While holding down the knob, light the gas at the burner with a match.
^When the flame appears, keep the control knob pressed in for 8 - 10 seconds to allow for the Ignition Safety Control to reach operating temperature.
16
