HOW TO ASSEMBLE / OPERATE YOUR CLEANER
A) HANDLE ASSEMBLY
Upper cord hook
Hose clip
Lower cord hook/ Carrying handle
1)Insert the base of the handle into the top of the body of the machine as shown. Push down the handle and tighten the screw.
IMPORTANT: Do not over tighten the screw.
2)Set the hose around the hose clip.
3)Turn the upper cord hook to the upright position and wind the power cord around the upper and lower cord hooks.
B) POWER CORD STORAGE
1) Turn the upper hook to | 2) Set | the power cord into |
release the power cord | the | cord clip to help |
for instant use. | secure it during use | |
NOTE: To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
To avoid any possible damage to the power cord, never run over the cord or allow it to become caught in the rotary brush.
C) ON / OFF SWITCH
To start or stop the vacuum cleaner, push the switch to “I” to turn it ON, and to “O” to turn it OFF.
4
