Miele T1570C To select a program, To change a program during drying, Correct procedure

Program selection

To select a program

A program can only be selected when the machine is turned on.

Set the desired program by turning the program selector either clock- wise or counterclockwise.

Press the “Start” button.

The program status will be stored for 30 minutes in the event of a power failure.

The program is cancelled if:

–There is a power failure lasting more than 30 minutes.

–The program has already reached the “Cooling down” or “Anti-crease” stage.

To change a program during drying:

Set the program selector to the desired program.

The new program will start from the be- ginning.

The tables following on the next two pages list the range of applications for the different programs.

Correct procedure:

1Press the “On/Off” button.

2Press the “Door” button and load the drum.

3Close the door with a firm swing - do not push it shut.

4Select “Low temp.” and “Buzzer” if so desired.

5Select a program.

6Press the “Start” button.

After the program has finished:

1Set the program selector to “Finish”.

2Remove the laundry.

3Clean the lint filter.

4Turn off the machine.

5Empty the condensed water con- tainer.

(Omit this step if dryer has been set up for external drainage of con- densed water)

11