Problem solving guide
The interior drum light fails to func- tion: The bulb may be defective.
Replace it as follows:
Turn off the machine or disconnect it from the power supply.
Open the door.
Use a 3/4’’ wrench to unscrew the plastic bulb cover located inside the drum and above the door (see illus- tration).
The light bulb must not exceed the maximum wattage quoted on the data plate.
Replace the bulb and the plastic cover.
The cover must be correctly installed and tightened, otherwise moisture may seep in and cause the socket to cor- rode.
This is a
To open the door in the event of a power failure
Pull forward on the
20
